Saturday, December 22, 2012

Snowman ornament

Last year, I saw this snowman ornament pattern at threadabead and made a mental not to try it.  Believe it or not, I actually remembered!


I really like the way it turned out.  The beads fit snugly over the ornament.  There is no danger of the beadwork "slipping" a bit.   The pattern was easy to follow and fun to do.

I love the attention to detail:  the buttons, eyes, carrot nose (I used a bicone) and the hat.


 This Santa ornament is a similar ornament (and my next project).  Here's hoping I finish him before the real Santa makes an appearance.

Thursday, December 20, 2012

i heart macro - Snow!

The weather has been erratic, to say the least, this year.  The daily high temperature has alternated between 60-70 degrees and 20-30 degrees.

A few days ago, we were playing outside without coats.  This morning, we woke up to this.



Snow!



The kiddo enjoyed making snow angels.


She sat in the snow and even rolled in it (I think).  There wasn't an inch of her not covered.



Her pants are supposed to be gray with a pink lining.

We got less than an inch of snow, but the kiddo didn't let that stop her.  She created her own snowfalls.


I think a warm bath and hot chocolate are in order.  :)

Sunday, December 9, 2012

Christmas earrings

These earrings get a ton of "wear" during December and January.  They are very inexpensive to make (about $1 a pair) and are just plain cute.  :)  Several years ago (more years than I care to count), I made about 10 pairs and gave them to my aunts and cousins.


I have seen similar designs, like this one and this one, both from Fusion Beads.  I like my snowmen a bit better, though, because the scarf seems to be blowing in the wind.

While browsing, I saw this design and couldn't resist.


(My version used bordeaux  and white pearls instead of the red coral and ivory pearls the design calls for.)

I can't decide if these remind me more of a dancer from the "Nutcracker" or of Santa.  Either way, they are adorable.

Speaking of nutcrackers, Fusion Beads has nutcracker earrings here.

I posted about these earrings last year, but wanted to show them to you again.


These earrings combine this hanging Santa pattern from threadabead with a Christmas tree made from Swarovski margarita beads (like this one).

These earrings are a bit big, but I enjoy wearing them.  As I mentioned in my previous post, they would make a great ornament.

Beading Babes project 7

It's time again for our Beading Babes reveal.

This time around, instead of selecting projects for us, Karyn asked our Facebook group for ideas.  Collectively, we chose four projects.

The first project was "Enchanted Rivoli Earrings," designed by Csilla Csirmaz and published in the August 2012 issue of Beadwork Magazine.


I really enjoyed this project.  The earrings are comprised of a bezeled rivoli and a strip of herringbone rope.

The pattern called for several different sizes of seed beads so that the herringbone rope slowly increases in size.  I didn't have the size 9 seed beads called for, so I improvised.


I adore how they turned out.

Next was "Roller Beads," designed by Cathy Lampole and published in the October 2012 issue of Bead and Button.

I was pleased to see Cathy's name.  I love Cathy's shop and highly recommend her patterns.  Please take some time to check it out.

I was impressed by the finished roller bead.  The base is made from 4mm and 3mm pearls and embellished with crystals.  It looks great from the side or from the front.


I decided to something a bit different with these.  I made a metal wire frame and hung the bead from it.  I love my roller bead earrings.


Our third project was also published in the October 2012 issue of Bead and Button.  It is "Scalloped Pearls," designed by Angelle Procopio

I had a hard time deciding on a color scheme for this project.  I couldn't find bugle beads and pearls that I liked together.  Then Marcie Abney Carroll was kind enough to share the beads she used for the teal version of her picture frame pendant.  (This is a wonderful pattern, by the way.  I have it and highly recommend it and all of Marcie's patterns.)

I loved those teal bugles, so I started with those.  

I ended up improvising here as well.  I accidently ordered the 9mm bugles instead of 6 mm.  I also didn't have any cube  beads, so I used size 8 seed beads and 3mm crystals instead.


I tried to add a bronze clasp, but I didn't like how it attached to the bugle beads.  Instead, I created a small flower clasp which mimics the waves in the bracelet.


I used a snap closure which is hidden behind the flower.  I love how it came out.

Our last project was "Gothic Butterfly Bracelet," designed by Mikki Ferrugiaro and published in the December 2010 issue of Beadwork Magazine.

I had been wanting to make this bracelet since I saw it almost two years ago, but never got around to it.  Thankfully, Karyn gave me the "push" I needed.

Looking at this bracelet, I thought the wings were flat peyote and the connector strips were sewn on top.  That is not the case.  The wings (including the beginning of the connector strip) is one piece of peyote which folds up because of the different bead sizes.


I was also amazed that the wings are shaped pieces.  The wings don't droop or sag -- they sit perfectly on the top of your wrist.

Everything about this bracelet is stunning, from the focal, to the wings, to the straps.


I love how the top of the bracelet sits on your wrist easily.


Mikki has many more beautiful designs in her Artfire shop.  I highly suggest you take a look.

Karyn, thank you again for putting this together.  It was fun, as always.  I really enjoyed (finally) getting to a favorite project and finding a few new favorites.

Saturday, December 1, 2012

Floral Holiday Blog Hop

For my entry in the 3rd Annual Challenge of Color, click here.

Lisa Lodge, from A Grateful Artist, is known for creating wonderful bead soup mixes and hosting fun (and challenging) blog hops using those great mixes.

This time around, Lisa sent bead mixes with lucite flowers and leaves.  The mix I received contained beads and lucite in soft shades of blue and pink.


I started with the seed beads, the copper leaves and the white drops.  I paired those with clear/pink seed beads and a bit of chain from my stash.


I used the bright pink beads in one strand and ended all three strands with the white drops from Lisa's kit.


This rhinestone link from Michaels is perfect for the holidays.


The end piece is this lariat.


Next, I tackled the lucite pieces.  I mentioned above that the lucite flowers and leaves were light blue and pink, yet the picture showed metallic leaves and flowers.  What happened?

Well, as I looked at the beads in the mix, I kept stumbling with the "holiday" part of the challenge.  For me, "holiday" evokes images of silver and gold.  How to make the pinks and blues play well with metallics?

Then it hit me.  A few weeks prior, I had read this post by Sherri of Knot Just Macrame.  Sherri posted a tutorial for painting lucite flowers.  I thought I'd try her technique.  I didn't have any patinas, but I did have the kiddo's acrylic paints.

This is what I ended up with.


I thought the lucite flowers looked wonderful doubled up.  For the center of the flowers, I made two mini cuboctahedra from the Infinity Ubercube pattern by Gwen Fisher and Florence Turnour.  (You can find this pattern and many others on their website, Bead Infinitum.)


I bezeled the pink rounds from the kit  and made more flowers using Jean Power's "Crystal Flower" pattern from her book, Geometric Beadwork.  (If you are a seed beader, put this one on your Christmas list -- it's wonderful!)


I thought all the flowers looked wonderful together.


I attached the lucite and beaded flowers to a strand of silk cord and a beaded herring bone rope.


I made a quick S hook with copper wire and applied a bit of gilders paste.


Here is the finished necklace.


I was happy to see it turned out like I had imagined.

I was sad that the lucite leaves didn't make it into the necklace, so I decided to make a bracelet just for them.


I've always liked chain maille, but rarely take the time to weave anything.  I made a quick Byzantine weave bracelet using copper, silver and black rings.

I attached the lucite leaves here and there, along with the remaining pink beads from the kit and a few of the flowers I didn't paint.


I love my floral holiday charm bracelet!


So does the kiddo.  She loved modeling it for you.


Lisa, thank you for such a wonderful hop!

Please  take a few minutes and see what wonderful things the other participants did with their soups.

Courtney Breul, Beads by Breul
Jeannie Dukic, Jeannie's Blog
Kimberly Flood, Goddesses and Beads
Mary Govaars, MLH Jewelry Designs
Tanya Goodwin, A Work in Progress - you are here
Kathy Lindemer, Bay Moon Design
Alicia Marinache, All the Pretty Things
Toltec Jewels, Jewel School Friends